Requirements: 1300-1400 words

Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 1 of 16
Instructions to Student
• Answer all questions.
• Deadline of submission: 28/04/2021 23:59
• The marks received on the assignment will be scaled down to the actual weightage of the assignment which is 50 marks
• Formative feedback on the complete assignment draft will be provided if the draft is submitted at least 10 days before the final submission date.
• Feedback after final evaluation will be provided by 05/05/2021
Module Learning Outcomes
The following LOs are achieved by the student by completing the assignment successfully:
1) Acquire hydraulic laboratory data at an appropriate level of accuracy and interpret it in terms of underlying engineering principles
2) Present relevant information and calculations in a clear and unambiguous way
Assignment Objective
The basic aim of this assignment is to provide students with an opportunity to explore the fundamental principles of fluid mechanics through experimentation and give detailed description and analysis of the basic physical properties of fluids and movement of water in pipes.
Assignment Tasks
Task 1 (5 marks)
Submit a work proposal for this assignment on or before 05/04/2021 (23:59) which must include:
1. Initial understanding of tasks
2. Timeline and work breakdown
3. Resources
The work proposal must be submitted in a word file through the link available in Moodle.
IN SEMESTER INDIVIDUAL ASSIGNMENT
Module Code: CIVL0008
Module Name: Hydraulics 1
Level: 2
Max. Marks: 100
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 2 of 16
Task 2 (95% weightage)
Part 1: Pre-class & Post Class Activities [10 marks]
Student are required to regularly complete pre-class and post-class activities of every week before and after the class without fail. Your engagement with these activities will be considered and calculated cumulatively, to award the respective marks of this section.
Part 2
Each student is requested to write an extensive laboratory report. The report must include THREE EXPERIMENTS which must be selected from the following table; one experiment from each group:
Group No.
Experiments
Group 1
1. Determination of density and specific gravity of liquid.
2. Determination of capillary effect
Group 2
1. Verification of Archimedes principle.
2. Determination of viscosity of fluid
Group 3
1. Reynold’s Number Experiment
2. Determination of pipe friction factor
1. The Report should contain the following sections: [5 marks]
• Introduction
• Principles & Methods
• Data & Results (with result interpretation)
• Conclusions
• References
2. Introduction (maximum 300 words) [10 marks]
The introduction is very important as it sets the context for the report. Start with introduction and background on the experiments with refer to the important previous studies, state the report’s objectives, and describe how the report is organized.
3. Principles & Methods Used (maximum 400 words) [30 marks]
The methods section should include standard method of each experiment. Before starting with the steps, provide theoretical section in which you provide the theory of each experiment, the significance, the practical application, and description of concepts involved and mathematical equations used and units of measure. You also requested to provide a sketch of apparatus and its components. It is very important to identify the materials used and their relevant properties. The last part under the principals and methods section is to provide the steps of each experiment as per the standard.
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 3 of 16
4. Results Analysis (with result interpretation) (maximum 400 words) [30 marks]
Each student is requested to present all the three experiments data assigned to him/her using the Excel Sheet named “Laboratory Data Hydraulics 1 Spring 2020” and perform the calculation to generate results. The results should be presented in clear language and in past tense. Drawing the graph representing variations among different parameters. Make sure that all tables and figures are accurate and completed. The interpretation of results should only be presented in the Discussion section.
Result interpretation:
Each student is requested to interpret the results in light of what the published information. It is very important to identify the significant sources of error and error percentage, and to assess the reliability of your results. Students have to comment and justify their results, especially on any procedure that might affect results. You are requested to identify and explain any new or unfamiliar/surprising results. Students have to compare their results with published results, focusing on the same relationships.
5. Conclusions (maximum 150 words) [10 marks]
Every report should include a concluding statement/s reached as a result of this experiments. Restate the objectives of the report and state how you have achieved them. Present the main findings and key recommendations in a summarized. You should also restate the limitations of the report. Make sure conclusions appear in order of importance.
6. References [5 marks]
This is a list of all the sources of information you have referred to in the report (Harvard References Format); minimum 10 references. Cite all the references inside the report.
7. Appendix
Any additional figures, tables, and photos if required
DELIVERABLE:
The report should not exceed 10 pages, starts from the abstract to the references list.
Rules & Regulations:
• All resources should be cited using CU Harvard style.
• The final assignment must have a Title page, Table of Contents, References/ bibliography using CU Harvard Style and page numbers.
• Title Page must have Assignment Name, Module name, Session, your name, ID, and the name of the faculty.
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 4 of 16
• Softcopy in word format is to be submitted through Turnitin link on Moodle.
Guidelines:
• Assignment must be computer typed.
➢ Font – Times New Roman
➢ Font – Style – Regular
➢ Font – Size – 12
➢ Heading should be with Font Size 14, Bold, Capital and Underline.
• Explain with suitable diagrams wherever required. Diagrams must be drawn using suitable software or by pencil.
• Each student has to do the assignment individually.
• You can refer books in E-Library or use internet resource. But you should not cut and paste material from internet nor provide photocopied material from books. The assignment answers should be in your own words after understanding the matter from the above resources.
Assessment Evaluation Criteria Classification And % Range Knowledge and Understanding / Application of Theory / Evidence of Reading Technical / Practical Skills Reflection and critical analysis General / Transferable skills* First Class Outstanding 94 -100
• Outstanding knowledge and depth of understanding of principles and concepts.
• Outstanding ability to apply the theoretical concepts by considering of information systematically.
• Evidence of reading a wide range of educational literature/research and where applicable workplace strategies, policies and procedures.
• Tasks completed with very high accuracy.
• Outstanding skills in interpretation of results / and accomplishing practical tasks.
• Demonstrates high degree of autonomy in completing tasks
• Outstanding skills for critical analysis, evaluation and synthesizing.
• Outstanding reflective practices, demonstrating outstanding personal learning and growth, insight into required professional values and principles and professional development planning.
• Original Findings presented with conviction and justified very well
• Outstanding ability to use learning resources
• Outstanding presentation, logically structured, using accurate grammar and spelling.
• Mostly correct cross-referencing and links to supporting evidence
• Outstanding ability to communicate the information verbally and in writing.
• Outstanding ability to work in groups and to manage teams.
• Outstanding ability to learn autonomously.
• Very accurate referencing and bibliography using
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 5 of 16
appropriate referencing style
• Outstanding problem solving skills and outstanding decision-making skills. Excellent 84 – 93.99
• Excellent knowledge and depth of understanding of principles and concepts.
• Excellent ability to apply the theoretical concepts by considering of information systematically.
• Evidence of beyond the minimum expected range of of educational literature/research and where applicable workplace strategies, policies and procedures.
• Tasks completed with high accuracy.
• Excellent skills in interpretation of results / and accomplishing practical tasks.
• Excellent skills for critical analysis, evaluation and synthesizing.
• Excellent reflective practices, demonstrating excellent personal learning and growth, insight into required professional values and principles and professional development planning.
• Findings presented with conviction and justified well
• Excellent ability to use learning resources
• Excellent presentation, logically structured, using accurate grammar and spelling.
• Mostly correct cross-referencing and links to supporting evidence
• Excellent ability to communicate the information verbally and in writing.
• Excellent ability to work in groups and to manage teams.
• Excellent ability to learn autonomously.
• Accurate referencing and bibliography using appropriate referencing style
• Excellent problem solving skills for decision-making skills.
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 6 of 16
Second Class, Upper Division Very Good 77 – 83.99
• Very good knowledge and depth of understanding of principles and concepts.
• Very good ability to apply the theoretical concepts by considering of information systematically.
• Evidence of reading a very good number of educational literature/research and where applicable workplace strategies, policies and procedures.
• Tasks completed with very good accuracy.
• Very good skills in interpretation of results / and accomplishing practical tasks.
• Very good skills for critical analysis, evaluation and synthesizing.
• Very good reflective practices, demonstrating very Good personal learning and growth, insight into required professional values and principles and professional development planning.
• Findings presented with conviction with very good justification
• Very good ability to use learning resources
• Very good presentation, logically structured, using accurate grammar and spelling.
• Mostly correct cross-referencing and links to supporting evidence
• Very good ability to communicate the information verbally and in writing.
• Very good ability to work in groups and to manage teams.
• Very good ability to learn autonomously.
• Precise referencing and bibliography using appropriate referencing style
• Very good problem solving skills decision-making skills.
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 7 of 16
Second Class, Lower Division Good 70 – 76.99
• Good knowledge and depth of understanding of principles and concepts.
• Good ability to apply the theoretical concepts by considering of information systematically.
• Evidence of reading a good number of educational literature/research and where applicable workplace strategies, policies and procedures.
• Tasks completed with good accuracy.
• Good skills in interpretation of results / and accomplishing practical tasks.
• Good skills for critical analysis, evaluation and synthesizing.
• Good reflective practices, demonstrating good personal learning and growth, insight into required professional values and principles and professional development planning.
• Findings presented with conviction and good justification.
• Good ability to use learning resources
• Good presentation, logically structured, using accurate grammar and spelling.
• correct cross-referencing and links to supporting evidence
• Good ability to communicate the information verbally and in writing.
• Good ability to work in groups and to manage teams.
• Good ability to learn autonomously.
• Good referencing and bibliography using appropriate referencing style
• Good problem solving skills and decision-making skills. Third Class Satisfactory 60 – 69.99
• Satisfactory knowledge and depth of understanding of principles and concepts.
• Fair application of the theoretical concepts by considering of information systematically.
• Evidence of reading a fair number of educational literature/research and where applicable workplace strategies, policies and procedures.
• Tasks completed with satisfactory accuracy.
• Satisfactory skills in interpretation of results / and accomplishing practical tasks.
• Satisfactory skills for critical analysis, evaluation and synthesizing.
• Satisfactory reflective practices, demonstrating fair personal learning and growth, insight into required professional values and principles and professional development planning.
• Findings presented with conviction and satisfactory justification.
• Satisfactory presentation, logically structured, using accurate grammar and spelling.
• Satisfactory cross-referencing and links to supporting evidence
• Satisfactory ability to communicate the information verbally and in writing.
• Satisfactory ability to work in groups and to manage teams.
• Satisfactory ability to learn autonomously.
• Satisfactory referencing and bibliography using appropriate referencing style
• Satisfactory problem solving skills and
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 8 of 16
exceptionally competent for decision-making. Acceptable / Pass 50 – 59.9
• Basic knowledge and depth of understanding of principles and concepts.
• Basic ability to apply the theoretical concepts by considering of information systematically.
• Evidence of reading a few number of educational literature/research and where applicable workplace strategies, policies and procedures.
• Tasks completed with minimum acceptable accuracy.
• Acceptable skills in interpretation of results / and accomplishing practical tasks.
• Basic skills for critical analysis, evaluation and synthesizing.
• Basic reflective practices, demonstrating some personal learning and growth, insight into required professional values and principles and professional development planning.
• Findings presented with conviction and acceptable justification.
• Acceptable presentation, logically structured, using accurate grammar and spelling.
• Acceptable cross-referencing and links to supporting evidence
• Basic ability to communicate the information verbally and in writing.
• Basic ability to work in groups and to manage teams.
• Basic ability to learn autonomously.
• Basic referencing and bibliography using appropriate referencing style
• Basic problem solving skills and decision-making skills. Fail / Poor <50
• Inadequate knowledge and understanding of principles and concepts.
• Poor application of the theoretical concepts
• No evidence of reading educational literature/research and where applicable workplace strategies, policies and procedures.
• Tasks not completed
• Poor skills in interpretation of results / and accomplishing practical tasks.
• Poor skills for critical analysis, evaluation and synthesizing.
• Poor reflective practices, demonstrating some personal learning and growth, insight into required professional values and principles and professional development planning.
• Findings presented unconvincingly with improper justification.
• Poor presentation, logically structured, using accurate grammar and spelling.
• Inadequate cross-referencing and links to supporting evidence
• Poor ability to communicate the information verbally and in writing.
• Poor ability to work in groups and to manage teams.
• Poor ability to learn autonomously.
• Inadequate referencing and bibliography using appropriate referencing style
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 9 of 16
• Poor problem solving skills and decision-making skills.
Important Policies to be followed
1. Student Academic Integrity Policy*:
• MEC upholds the spirit of academic integrity in all forms of academic work and any form of violation of academic integrity shall invite severe penalty. Any benefit obtained by indulging in the act of violation of academic integrity shall be cancelled.
• MEC also reserves the right to notify the appropriate law enforcement authorities of any unlawful activity and to cooperate thereafter in any investigation of such activity.
• Faculty can conduct a viva to investigate and ascertain that the work submitted is student’s own work as per the guidelines for the same. A student can be given a maximum of 2 chances to attend the viva in such cases. It is expected that the student attends the viva during the first chance itself unless due to extenuating circumstances. If the student does not attend the viva in spite of being given 2 chances and fails to submit valid reasons, he/she will be awarded a fail in the module and this shall be counted as a case of academic integrity violation.
All cases of violation of academic integrity on the part of the student shall fall under any of the below mentioned categories:
1. Plagiarism
2. Malpractice
3. Ghost Writing
4. Collusion
5. Other cases
If the student fails a module and has a proven case of academic integrity violation in this module, the student is required to re-register the module. This is applicable to first and second offence of academic integrity violation of plagiarism type
1.1. First Offence of Academic Integrity Violation:
1.1.1. Plagiarism
a. If a student is caught first time in an act of academic integrity violation during his/her course of study in any assignment other than project work and if the type
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 10 of 16
of violation is plagiarism, then the student will be allowed to re-submit the assignment once as per the period allowed for re submission However, a penalty of deduction of 25% of the marks obtained for the resubmitted work will be imposed.
b. Period of re-submission: The student will have to re-submit the work within one week (5 working days) from the date he or she is advised to re-submit.
c. Re-submission of the work beyond the allowed period of resubmission will not be accepted and the assessment will be awarded a zero mark.
d. If the re-submitted work (within the allowed period of resubmission) is also found to be plagiarized, then that assessment component will be awarded a zero mark. It shall also contribute to the total count of academic integrity violation for that student.
e. If plagiarism is detected in UG Project work (Project 1, Project Planning and Project Design and Implementation), the above clauses do not apply, and the work will be summarily rejected. In these cases the student will be awarded a fail (F) grade and is required to reregister the module.
1.1.2. Malpractice / Ghostwriting / Collusion
If a student is caught first time in an act academic integrity violation during his/her course of study for an assessment component irrespective of coursework or end semester and if the type of violation is Malpractice/Ghostwriting/Collusion, then the student shall fail the module.
1.2. Second Offence of Academic Integrity Violation:
1.2.1. Plagiarism
a. If any student is caught second time in an act of academic integrity violation during his/her course of study and if the type of violation is plagiarism, then the student will not be allowed to resubmit the work, and s/he will directly be awarded zero for the work in which plagiarism is detected.
b. The student shall also receive a warning of suspension in such cases.
1.2.2. Malpractice/Ghostwriting/Collusion
a. If a student is caught a second time in an act academic integrity violation for an assessment component irrespective of coursework or end semester and if the type of violation is Malpractice/Ghostwriting/Collusion, then the student shall fail the module.
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 11 of 16
b. The student shall also receive a warning of suspension in such cases.
1.3. Third Offence of Academic Integrity Violation:
a. If a student is caught a third time in an act of academic integrity violation for an assessment component irrespective of coursework or end semester then the student shall fail the module and also shall be suspended for one semester from the College, once the academic integrity violation case is confirmed by Institutional Assessment Review Committee.
b. The student shall be suspended for the immediate subsequent semester and can register for modules only after having served the suspension period fully. This is also applicable for semesters offered in block mode.
c. During the suspension period, the student shall have to mandatorily complete a course on academic integrity/writing before s/he can register for any modules.
d. During the period of suspension, the student shall be allowed to attempt supplementary examinations if s/he is eligible for the same. S/he shall also be allowed access to all college facilities permitted for a regular student except for registering the modules.
1.4. Fourth Offence of Academic Integrity Violation:
a. If a student is caught a fourth time in an act of academic integrity violation for an assessment component irrespective of coursework or end semester, the student shall fail the module and also shall be expelled from the College, once the case is confirmed by Institutional Assessment Review Committee.
b. The student shall be expelled from the college and all access to the college facilities and premises shall cease to exist. The documents shall be released only after getting the NOC (No Objection Certificate) from Registration Office.
c. `On termination, the student shall not be refunded any fees paid for the academic semester in which academic integrity violation was observed.
1.5. Other cases
If a student commits an act of academic integrity violation as per the definition of “other cases” mentioned in the previous section or of a different nature, student’s case shall be forwarded to an Institutional Assessment Review Committee, Chaired by the Associate Dean, Academic Affairs. The committee shall investigate the case by means of a viva and/or a hearing of the parties concerned if required and shall take appropriate decision. The penalty that can be granted to a proven case of academic integrity violation which falls in this category of “other cases” can be a warning/component zero/ module fail/suspension/expulsion depending on the nature and gravity of the offence.
1.6. Types/Variations of cases of Plagiarism and associated actions
Type 1: In case plagiarism is detected in any component or part submission (submitted at different times) of one assessment (assignment), the deduction in marks will be applicable for the whole assessment (assignment), even if only the component or part submission alone needs to be resubmitted.
Type 2: In case plagiarism is detected in a group assessment, all students of the group will be considered as having committed an act of plagiarism irrespective of whether plagiarism is on
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 12 of 16
account of the act of all or a few or only one member. The policy will then be applied to all students.
If some students in the group are eligible to re-submit (first offence) and others are not eligible, only eligible students will be allowed to re-submit within a period of one week and the penalty will be applied as per the policy for each student according to his / her history of violations.
Type 3: Combination of Type 1 and Type 2: In case plagiarism is detected in any component or part submission (submitted at different times) of a group assessment (assignment), the deduction in marks will be applicable for the whole assessment (assignment), even if only the component or part submission alone needs to be resubmitted. All students of the group would be considered as having committed an act of plagiarism irrespective of whether plagiarism is on account of the act of all or a few or only one member. The policy will then be applied to all the students of the group.
If some students in the group are eligible to re-submit (first offence) and others are not eligible, only eligible students will be allowed to re-submit within a period of one week and the penalty will be applied as per the policy for each student according to his / her history of violation.
Type 4: Variation of Type 1 and Type 2: In cases where the assessment consists of components or part submissions that could be a group assessment component (e.g. group assignment) and an individual assessment component (e.g. individual reflection), the following will be applicable:
a. If plagiarism is detected in the group assessment component, all students of the group will be considered as having committed an act of plagiarism, irrespective of whether plagiarism is on account of the act of all or a few or only one member. The policy will then be applied to all students of the group. In such cases the group assessment component will be resubmitted.
If some students in the group are eligible to re-submit (first offence) and others are not eligible, only eligible students will be allowed to re-submit within a period of one week and the penalty will be applied for each student according to his / her history of violation.
b. If plagiarism is detected in the individual assessment component, the individual assessment component will be resubmitted – if the student is eligible for resubmission-. The policy will then be applied to that student alone.
c. In both cases (a) and/or (b), the deduction in marks will be applicable for the whole assessment (assignment).
1.7. Types/Variation of Cases of Multiple Offences
If student is caught with multiple violations of same or different nature in different modules of the same semester, they will be considered as one offence and student will be penalized for each violation according to the type of the offence.
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 13 of 16
If student is caught with multiple violations of same or different nature in the same module of the same semester, then they will be considered as different offences and each will contribute to the overall count of AIV. The student then shall be penalized for each violation according to the count and type of each offence.
* For further details Refer to MEC Student Academic Integrity Policy in Student Handbook.
2. Late Submission Regulations:
It is the students’ responsibility to check all relevant timelines related to assessments.
As per the Assessment Policy at MEC, late submissions are allowed for one week (5 working days) for all UG modules with a penalty. In such cases, a deduction of 5% of the marks obtained for the submitted work shall be imposed for each working day following the last date of submission till the date of actual submission. Assessment documents submitted beyond a period of one week (5 working days) after the last date of submission will not be accepted and will be awarded a zero for that assessment. In cases where the submission has been delayed due to extenuating circumstances, the student may be permitted to submit the work without imposing the late submission policy stated above. The extended period of submission will be one week from the original last date of submission. In such cases, the student is expected to submit the supporting certificates on or before the original last date of submission of the assessment and the decision of extension rests with faculty responsible for the assessment .The late submission policy shall be applied if the student fails to submit the work within one week of the original last date of submission.
Students may contact their teachers for clarification on specific details of the submission time if required.
3. Research Ethics and Biosafety Policy
To protect and respect the rights, dignity, health, safety, and privacy of research subjects involved including the welfare of animals and the integrity of environment, all student projects are expected to be undertaken as per the MEC Research Ethics and Biosafety Policy. Accordingly the following shall apply.
• Research and other enterprise activities shall be conducted by maintaining the high ethical standards consistent with national and international standards and conventions.
• Any research at MEC that is categorized as high-risk research shall be subject to review and approval by the Research Ethics and Biosafety Committee.
• Research activities involving collection of human or animal tissues and manipulation of microbial, animal or plant cells shall be subject to review and approval by the Research Ethics and Biosafety Committee.
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 14 of 16
• Participants involved in research must be informed about the purpose of research and intended uses of research findings. Written consent must be obtained from people involved prior to the commencement of research.
• Data obtained from participants must be treated with high confidence and should be used only for the intended purpose of research.
Student ID: Student Name:
No
Task
Outstanding
(≥ 91%)
(84-90%)
Excellent
(77-83%)
Very Good
(70-76%)
Good
(50-69%) Satisfactory
(< 50%) Poor
Marks
1
Pre class & post class activities
10
2
Report structure include abstract, introduction, methods, results, discussion, conclusions, references, appendix (if any)
5
3
Introduction
10
4
Principles & Methods
30
5
Results Analysis
30
6
Conclusions
10
7
References
5
Total Marks
100
Plagiarism Deductions
Late Submission
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 15 of 16
Final Marks out 100
Final Marks out 90
Evaluation criteria for Proposal
Student I.D__________________________Student Name_____________________________
No.
Description
Fail
(< 50)
Acceptable/pass
(50 – 59.9)
Satisfactory
(60 – 69.99)
Good
(70 – 76.99)
Very Good Quality
(77 – 83.99)
Excellent
(84 – 93.99)
Out standing
(94-100)
Marks scored
Marks
Obtained
1.
Initial understanding of tasks
35
2.
Timeline and work breakdown
35
3.
Resources
30
Total Marks Obtained
/100
Penalty
Marks after Penalty
Final Marks
Scaled-down to 5
Hydraulics 1 (CIVL0008) – Spring – 2021 – CW (Assignment 1) – A – QP
MEC_AMO_TEM_035_02 Page 16 of 16
Overall Marks- 100 Marks [Proposal (5M) + Report (95M)]
Task
Out standing
(91-100)
Excellent
(84-90)
Very Good (77-83)
Good
(70-76)
Satisfactory
(51-60)
Weak/ Poor
>50)
Marks achieved
Proposal (5 M)
Report (95 M)
Total Marks (100)